Cable Management Systems, FRP and GRP Cable Trays

FRP / GRP Cable Tray
FRP / GRP Cable Tray
FRP / GRP Cable Tray

Satyam India has gone a long way in manufacturing Cable Management Systems, FRP cable trays and GRP Cable Tray since the time of our inception. Our manufactured trays will work for almost eight to ten years after installation. It offers unexpected quality and generally more expensive than other similar normal products.

Quality Parameters Of Our Cable Management Systems

    • Easily Accessible
    • Corrosion Resistant
    • Remarkable Durability
    • Custom Specifications
    • Strength & Durability
    • UV Protected

Highlights Of Our Manufactured GRP And FRP Cable Trays

    • Corrosion Resistance
    • Light in Weight
    • Easy to Install & replace
    • As it is self pigmented No need of painting
    • Fire Retardant & Ultra Violet (UV) Stabilized
    • Strength & Durability
    • Available in all colour

Today, customers are focused more on quality than prices. This is the reason they prefer Satyam India where quality range of FRP and GRP cable trays can be available at most affordable prices. Our wide experience and deep domain knowledge enable us to deliver customized product range based on your needs and specifications.

Applications of GRP Cable Trays

    • Chemical Industries
    • Highly Corrosive Area
    • Off Shore Platforms
    • Oil & Gas Refineries
    • Water Treatment Plants
    • Paper Industries
    • Power Plants

This is our continuous efforts and dedication only that enable us to cater variety of needs of our clients. Our products can be availed in multiple sizes and dimensions. They are manufactured using Pultrusion automated process where scrap loss is almost negligible.

Applicable Standards:

    • NEMA FG1-1993 Standard For FRP/GRP Cable Tray Loading Specifications.
    • IS6746:1994 Standard for Fire Retardant properties of FRP/GRP Cable Trays,
    • IS6746 Appendix K for Low Flammability,
    • ASTM standards for Typical Properties of FRP/GRP Cable Trays as under.
      • ASTM D 2863 – Oxygen Index Test
      • ASTM D 570 - Water Absorption Test
      • ASTM D 638 - Tensile Properties
      • ASTM D 695 - Compressive Properties
      • ASTM D 790 - Flexural Properties
      • ASTM D 256 - Izod Impact Strength
      • ASTM D 149-97a – Die Electrical Strength (Axial & Radial)
    • we are also following EIL Standards for EIL Projects.

Fittings & Accessories for FRP / GRP Cable Trays

All the fittings/ accessories like Horizontal Bends, Vertical Bends, Reducers, TEE Joints & other are prefabricated from the same Specifications & materials by means of SS Fasteners.

Coupler Plates / Connecting Plates

Coupler Plates are used to join two straight Length of the cable trays or bends by means of SS 316 Hardware. The coupler plates are in different sizes according to sizes of the cable trays. The material of the Coupler Plates is same as cable trays material i.e. Fiberglass Reinforced Plastic (FRP).
To know more on our custom range of Cable Management Systems, FRP cable trays and GRP Cable Tray, kindly contact our expert team at Satyam India right away.

Technical Specifications for the FRP/GRP Perforated Cable Tray

Type of cable trays FRP material, Perforated type
Material of cable trays Antistatic & ultraviolet resistant FRP
Manufacturing Process Pultrusion Process using automated Pultrusion machines
Glass content in cable trays > 55 %
Resin to be used Ultra violet resistant polyester resin
Standard Sizes of the Cable Trays 50 x 30 x 3mm Thk.
50 x 50 x 4mm Thk.
100 x 30 x 4mm Thk.
100 x 50 x 4mm Thk.
125 x 30 x 4mm Thk.
150 x 30 x 4mm Thk.
150 x 50 x 4mm Thk.
200 x 50 x 4mm Thk.
250 x 50 x 4mm Thk.
300 x 50 x 4mm Thk.
Support Span 3 Meters
Loading Capacity (As per NEMA FGI-198x Standard) 50mm Width : 07 Kg/linear meter
100mm Width : 15 Kg/linear meter
150mm Width : 30 Kg/linear meter
200mm Width : 45 Kg/linear meter
300mm Width : 60 Kg/linear meter
Permissible deflection under Test Shall not exceed L/200mms or 10mm whichever less
Standard Length of the Tray 3Mtrs or as per Customer’s Requirement.
Cable Tray Accessories Cable Tray Accessories shall be of same materials of cable trays & it includes Horizontal & Vertical Bends, Tees, Reducers, and Cross etc. with minimum Bending Radius of 300mm.
Coupler Plates Shall be of same materials of Cable Trays & 2 nos. required for each length of the cable tray with Hardware of SS 316
Type Tests of FRP Pultruded Sections Flammability : As per IS6746 Appendix K
Flame Retardant : As per UL 94
Oxygen Index : As per ASTM D 2863
Flame Spread Index : As per ASTM E-84 / As per ASTM D 635
UV Exposure : As per ASTM G 154
Mechanical & Electrical Properties of FRP Pultruded Sections. Tensile Strength : ASTM D 638-91
Flexural Strength : ASTM D 790 -92
Compressive Strength :ASTM D 695-91
Die Electric Strength : ASTM D 149-97a
Izod Impact : ASTM D 256

Technical Specifications for the FRP/GRP Ladder Cable Tray

Type of cable trays FRP material, Ladder type
Material of cable trays Antistatic & ultraviolet resistant FRP
Manufacturing Process Pultrusion Process using automated Pultrusion machines
Glass content in cable trays > 55 %
Resin to be used Ultra violet resistant polyester resin
Side runner of the cable tray Pultruded FRP channel of 100mm height with minimum 4mm thickness
Support Span 3 Meters
Spacing of Rungs 300 mm
Rung of the Cable Tray Pultruded FRP Square Pipe Section of Size: 25 x 25 mm
Joining Details of Rung with Cable Tray Rung should be fastened with the cable tray by Glass Filled Nylon Bush & Epoxy Sealing
Loading Capacity (As per NEMA FGI-198x Standard) 150mm Width: 30 Kg/linear meter
300mm Width: 60 Kg/linear meter
450mm Width: 75 Kg/linear meter
600mm Width: 90 Kg/linear meter
750mm Width: 120 Kg/linear meter
900mm Width: 150 Kg/linear meter
In addition to point load of 70 Kg to be put at Centre of the span.
Permissible deflection under Test Shall not exceed L/200mms or 10mm whichever less
Standard Length of the tray 3Mtrs or as per Customer’s Requirement.
Cable Tray Accessories Cable Tray Accessories shall be of same materials of cable trays & it includes Horizontal & Vertical Bends, Tees, Reducers, and Cross etc. with minimum Bending Radius of 300mm.
Coupler Plates Shall be of same materials of Cable Trays & 2 nos. required for each length of the cable tray with Hardware of SS 316
Type Tests of FRP Pultruded Sections Flammability : As per IS6746 Appendix K
Flame Retardant : As per UL 94
Oxygen Index : As per ASTM D 2863
Flame Spread Index : As per ASTM E-84 / As per ASTM D 635
Mechanical & Electrical Properties of FRP Pultruded Sections. Tensile Strength : ASTM D 638-91
Flexural Strength : ASTM D 790 -92
Compressive Strength :ASTM D 695-91
Die Electric Strength : ASTM D 149-97a
Izod Impact : ASTM D 256

FRP / GRP Cable Tray